[ Product Selection ] |
KBL005G THRU KBL10G |
|
GLASS PASSIVATED SINGLE-PHASE BRIDGE RECTIFIER | |
VOLTAGE RANGE CURRENT |
|
Features:
|
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS |
|||||||||
Ratings at 25oC ambient
temperature unless otherwise specified. 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. |
|||||||||
Ho Chien Bridge Rectifier Product |
PART NUMBER |
||||||||
KBL SERIES | Symbol | KBL 005G |
KBL 01G |
KBL 02G |
KBL 04G |
KBL 06G |
KBL 08G |
KBL 10G |
Units |
Max. Recurrent Peak Reverse Voltage | VRRM | 50 | 100 | 200 | 400 | 600 | 800 | 1000 | Volts |
Maximum RMS Voltage | VRMS | 35 | 70 | 140 | 280 | 420 | 560 | 700 | Volts |
Maximum DC Blocking Voltage | VDC | 50 | 100 | 200 | 400 | 600 | 800 | 1000 | Volts |
Max. Avg. Forward
TA = 50oC (Note 1) Rect. Output Cur. at TA = 40oC (Note 2) |
I(AV) |
4.0 |
Amps | ||||||
Peak Fwd Surge Cur,
Single half sine-wave Superimposed on rated load (JEDEC Method) |
IFSM |
150.0 |
Amps | ||||||
Rating for fusing (t<8.3ms) |
I2t |
93.0 |
A2S | ||||||
Maximum Instantaneous Forward Drop per element at 4 Amps |
VF |
1.1 |
Volts | ||||||
Max. DC Rev Current
at Rated TA = 25oC DC Block Volt per element TA = 125oC |
IR |
5.0 |
uA | ||||||
Typical Junction Capacitance per element (Note 3) |
CJ |
95.0 |
40.0 |
pf | |||||
Typical Thermal Resistance from Junctioin to Ambient (Note 1) |
ROJA |
10.0 |
oC/W | ||||||
Operating Temperature Range |
TJ |
-55 to +150 |
oC | ||||||
Storage Temperature Range |
TSTG |
-55 to +150 |
oC | ||||||
Notes: 1. United mounted on 3.0"x3.0"x.11" thick (7.5x7.5x0.3 cm) Al. plate. 2. United mountedon P.C. Board at .375", 9.5MM lead lengths with .5"x.5" (12mmx12mm) copper pads. 3. Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts. Ratings and Characteristics Curves are available. Contact us for a copy by Fax or E-Mail. |
|||||||||
For more information or
samples Call (909) 596-6298 E-Mail: hochien@hochien.com |
Ho
Chien Electronic Group, Inc. 1687 CURTISS COURT LA VERNE, CA 91750, USA |