| Comb-Dub Coding Systems |
| Technical data | Connector with signal contact |
Crimp/Solder Coaxial contacts |
Crimp/Solder Power contacts |
|
| Insulator | PBT (ULV94V-O) RoHs | - |
- |
|
| Shell / Finished | Steel / Tin or Zinc Yellow Chromate | - | - | |
| Contact / Finished |
Beryllium Copper / Gold over nickel (See coding) | Cu Alloy / Gold over nickel (See coding) |
||
|
Retaining clip |
Cu Alloy |
Cu alloy |
||
| Insulators |
Teflon |
|||
| Current rating (DC) |
7.5A UL 5A CSA 5A VDE |
2 A UL 2 A CSA |
10A 20A 40A |
|
|
Test voltage (between 2 contacts shell and contact) |
1000V, 50Hz 1 min. |
|||
|
Contact Resistance (between mated contacts) |
<2.7 mΩ | |||
| Insulation resistance | >5 GΩ | >107 MΩ | >5 GΩ | |
| Volume resistivity | 1016 Ωcm | |||
| Dieletric strength | 50KV/mm | |||
| Characteristic impedance | 50/75 Ω | |||
| Contact resistance. (Inner/outer conductor) |
<2.7mΩ | <1mΩ |
<1mΩ | |
|
VSWR-Value (MIL-C-39012) |
1.2GHz | <1.2 | ||
| 1.5GHz | <1.3 | |||
| 2.0GHz | <1.5 | |||
| Dielectric voltage | 750V, 50Hz | |||
| Frequency range | 0-2GHz | |||
| Working Voltage |
250V UL 250V CSA 250V VDE |
250V UL 250V CSA 250V VDE |
300V UL 300V CSA |
|
| Temperature range | -55°C to +125°C | -55°C to +135°C | -55°C to +155°C | |
| Insertion force per signal contact. | < 3.4N | < 7N | < 7N | |
| Extraction force per signal contact. | > 0.2N | < 7N | ca. 5N | |
|
Mating cycles |
depends on plating thickness | 500 | 500 | |
Technical alterations are subject to change without notice.